How to Tie Sperrys Leather Laces?

How to Tie Sperrys Leather Laces?

Sperrys are a popular type of boat shoe that has been around for many years. They are often made with leather laces and can be difficult to tie properly. In this article, we will provide a step-by-step guide on how to tie Sperry leather laces. We will also answer some common questions that people have about this process. So, if you are looking to learn how to tie your Sperrys the right way, keep reading!


Tying a Barrel Knot:

  • Step 1: Begin by threading the left lace through the first and second eyelets on the shoe;
  • Step 2: Take the right lace and wrap it around the back of your ankle, then bring it up over the front of your foot;
  • Step 3: Thread this lace through the third eyelet from top to bottom, and then cross it with the left lace before looping it through one more time;
  • Step 4: Pull both sides taut until you have a nice barrel knot at your ankle;

Tying a Barrel Knot

Tying a Tassel Knot

Tying a tassel knot is the classic way to lace up Sperry leather loafers. All you need is the two laces and about 5 minutes of your time.

Here’s how it works:

  1. Start by threading one end of each lace into the bottom set of eyelets from the inside out;
  2. When both ends are through, cross them over at the center and thread each side back in through the next set of eyelets on either side (from outside in);
  3. Repeat Step 2, alternating sides until all eyelets have been used up;
  4. To finish off your knot, tie an overhand knot with extra tension using both laces;
  5. When your knot is done, pull it tight and tuck the end of each lace into their respective eyelets on either side of the shoe;
  6. Now simply adjust the fit by tugging gently at both laces before tying a second double overhand knot to complete your tassel knot;

Tying a Chain Knot

To tie a chain knot, start off by threading both laces through the eyelets on one side of your shoe. Cross the laces over each other and then bring them up through the eyelets on the other side of your shoe, making sure to keep the cross pattern intact. From there, take one lace in each hand and create loops with them before bringing them back down through their respective loops and pulling tight.

Tying a Surgeon’s Knot

The most popular way to tie Sperry leather laces is with a surgeon’s knot. This method creates a secure hold and also looks great.

Here are the steps to tie a surgeon’s knot:

  1. Start by threading one lace through each of the eyelets in your shoe, starting from the bottom and working your way up;
  2. When you reach the top, tie an overhand knot at the end of each lace. Make sure the two laces are crossed for the overhand knot;
  3. Now pull both laces to tighten the knots, then cross them again and make another overhand knot with each lace on top of the previous knots you just tied;
  4. Pull the laces tight once more to create a secure hold, and your surgeon’s knot is finished;

Tying a Fishtail

Tying a fishtail knot is an advanced technique for tying Sperry leather laces.

Here are the steps:

  • Step 1: Begin by threading both laces through each eyelet, starting from the top and working your way down;
  • Step 2: Tie a basic overhand knot with one of the laces, then cross it with the other lace before looping it back around itself to create a figure 8 shape;
  • Step 3: Tighten the knot slowly until you have two loops that are approximately equal in size;
  • Step 4: Take one loop in each hand and twist them together twice so that they form a single continuous strand again;
  • Step 5: Finally, pull both laces taut and your fishtail knot is finished! [1];

Tying a Fishtail


How do you style Sperry laces?

You can style your Sperrys in lots of different ways depending on the knot you choose to tie. A tassel knot is a great option if you want something classic and stylish, while a surgeon’s knot is great for extra security. Alternatively, if you want something more unique and eye-catching, try tying a fishtail or barrel knot. [2]

How do you tie leather bootlaces?

Tying leather bootlaces is a relatively simple process. Whether you are tying up your Sperry shoes or any other style, the basic steps for tying them remain the same. Here’s a step-by-step guide to help you make sure your shoelaces stay tied:

  1. Start off by threading one end of the lace through the first two eyelets on each side of the shoe. Make sure that both ends are even in length;
  2. Cross the two ends over one another and thread one end through the eyelet directly below it on its respective side of the shoe;
  3. Now, cross those two ends again, and thread them through two more eyelets. Again, make sure that both ends are the same length;
  4. Take one end and thread it up through the eyelet directly above the loop (on its respective side of the shoe);
  5. Finally, thread the two ends down through the loop and pull to secure them in a knot;

How do you tie rawhide laces?

Tying rawhide laces on your Sperrys can be daunting. It’s a tricky process, but with the right knowledge and practice, you can master this skill in no time.

Here is a simple step-by-step guide to help you tie your leather laces correctly:

  1. Start by threading each end of the lace through the top hole of the shoe and pull it tight;
  2. Tie an overhand knot near the bottom of the shoe, then feed one side of the lace through both sets of loops created by the knot. Pull tightly to secure it in place;
  3. Take each side of the lace over one leg and under the other, creating a loop on each side;
  4. Cross the laces over at the top, creating a loop on one side and a knot in the middle. Pull tight to secure it in place;
  5. Take one side of the lace and wrap it around the other lace two times, then tuck it underneath itself to make a second knot;
  6. Finally, tie off both ends of the laces into an overhand knot beneath your shoe’s tongue or tab for a finished look;

How do you tie rawhide laces?

How do you tie loafer laces?

Loafers are a bit different from other types of shoes because they don’t have eyelets. To tie loafer laces, start off by threading one end of each lace through the back of the shoe and out through the front. Cross the laces over and then bring them back up through the same set of holes in reverse order. From there, tie whichever knot you prefer using the instructions outlined above and pull tight to secure your knot. [3]

Useful Video: How To Tie Shoe Lace Barrel Knot | (Sperry, Bean Boot, Boat Shoes)


If you want to give your Sperrys a more personal touch, or just want to switch things up, try out some different lacing techniques! With a little bit of creativity, you can totally change the look of your shoes. And who knows, maybe you’ll even start a new trend. So grab those trusty leather laces and get to experimenting!